• K&N Performance Cold Air Intake Kit 77-2591KP with Lifetime Filter for Ford F150 5.0L V8

    The K&N 77-2591KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ford F150 models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothens and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine's RPM range. The 77-2591KP air intake comes with a chrome-topped K&N high-flow air filter and a heat shield that installs onto the lower air box. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory crank case vent hose and EVAP check valve hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. Some K&N 77 series air...

    • Brand: K&N
    • ASIN: B00UZ4N5MQ
    • UPC: 024844359155

  • S&B Filters 75-5081 Cold Air Intake 2015-2017 Ford F150 2.7L, 3.5L Ecoboost (Cotton Cleanable Filter)

    flujo 2013 2011 ram eco diesel performance specter large diameter throttle body induction mustang v6 exhaust raptor racing supercharger for custom 2012 upper manifold 2014 jack kn box dorman blue lines 06 accessories 08 2003 expedition flow river 350 2000 excursion turbo 2004 heat shield boost systems evap 05 sport fuel crank wheels 150 04 intakes space lifetime series 07 f250 system 57 truck tube chrome sb an manifolds with new time 660 yamaha banshee lid 80 2002 warrior 700 2010 svt tune sale carb cleaner clamp upgrade dyno twin perfect fit 21x27x5 usa power rack cai xlt torque mill bike cleaning

    • Brand: S&B
    • ASIN: B01FGPL4VW
    • UPC: 841372036347

  • Spectre Performance 9903 Air Intake Kit with Red hpR Filter for GM Truck V8

    This Spectre air intake system for Chevrolet and GMC trucks is designed to get large horsepower and torque gains from select C1500, C2500, C3500, K1500, K2500 and K3500 models while protecting your engine from harmful dirt and debris. This air intake comes with a red Spectre reusable low air filter, high quality polished aluminum tubing and a black powder coated heat shield. The heat shield has been designed specific to your Chevy/GMC pickup engine bay to help prevent hot engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish.

    • Color: Red
    • Brand: Spectre Performance
    • ASIN: B001FFHKMK
    • UPC: 089601990309

  • Performance Cold Air Intake Kit with Lifetime Black Oiled Filter For 2009 2010 2011 2012 2013 Cadillac Escalade & Chevrolet Avalanche Silverado 1500 Tahoe & GMC Sierra Yukon XL 1500

    Fitment:Year Make Model Engine2009-2014 Cadillac Escalade 6.2L V82009-2013 Chevrolet Avalanche 5.3L V82009 Chevrolet Avalanche 6.0L V82009-2013 Chevrolet Silverado 1500 4.8L V82009-2013 Chevrolet Silverado 1500 5.3L V82009 Chevrolet Silverado 1500 6.0L V82009-2013 Chevrolet Silverado 1500 6.2L V82009-2014 Chevrolet Silverado 1500 5.3L V82009-2013 Chevrolet Silverado 1500 6.0L V8 2009 Chevrolet Tahoe 4.8L V82009-2014 Chevrolet Tahoe 5.3L V82010 Chevrolet Tahoe 6.0L V82009 Chevrolet Tahoe 6.2L V82009-2013 GMC Sierra 1500 4.8L V82009-2013 GMC Sierra 1500 5.3L V82009 GMC Sierra 1500 6.0L V8br>2009-2013 GMC Sierra 1500 6.2L V82009 GMC Yukon 4.8L V82009-2014 GMC Yukon 5.3L V8 2009-2014 GMC Yukon 6.2L V82009-2014 GMC Yukon XL 1500 5.3L V82009 GMC Yukon XL 1500 6.0L V8 2009-2014 GMC Yukon XL 1500 6.2L V8 Features: 1. Improve the performance of your vehicle's cold air intake system 2. Replace the factory air intake system, easy to install 3. Add power and acceleration while protecting the vehicle's engine 4. High quality, unbeatable price Specifications: 1. Material: Aluminum 2. Color: Black 3. Package Dimensions: (21.65 x 15.75 x 10.63)" / (55 x 40 x 27)cm (L x W x H) 4. Weight: 11.66lbs Package Includes: 1 x Cold Air Intake Kit

    • Brand: MILLION PARTS
    • ASIN: B073S846S2

  • Roush 421981 2015+ F-150 Cold Air Kit-3.5L/2.7L V6 EcoBoost (Including Raptor)

    Roush performance is the automotive performance product division of Roush industries. Roush Performance's mission is to deliver to the customer quality high performance automotive products and services, including completely assembled pre-titled vehicles, aftermarket performance parts, performance crate engines, performance part installation, hot rod restoration, and custom graphics. The larger Roush company has a wide set of capabilities ranging from engineering, manufacturing, design, fabrication, racing, and much more. This rich collection of skills and resources goes into the services We offer and the products We sell.

    • Color: Black
    • Brand: Roush
    • ASIN: B0187XU08S
    • UPC: 844764006058

  • K&N Performance Cold Air Intake Kit 63-2592 with Lifetime Filter for Ford F150 3.5L Turbo Ecoboost

    The K&N 63-2592 Air Charger air intake system replaces the restrictive factory air filter and air intake housing on specific Ford F150 EcoBoost models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body and turbo inlet for a guaranteed power gain. The tube accommodates the factory air temperature sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver and an Allen wrench.

    • Brand: K&N
    • ASIN: B01BGZLXWQ
    • UPC: 024844358219

  • K&N Performance Air Intake Kit 63-3082 with Black HDPE Tube and Lifetime Red Oiled Filter for Escalade, Silverado 1500, Suburban, Tahoe, Sierra, Yukon, Denali, XL

    The K&N AirCharger 63-3082 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3082 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that replaces the factory air box. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Clamp Style - Regular

    • Brand: K&N
    • ASIN: B00IOU1BPQ
    • UPC: 024844346582

  • K&N 69-2004TTK 69 Series Typhoon Black Air Intake Kit

    The K&N 69 Series Typhoon Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Some Typhoon's have high quality finish options including polished aluminum (part ends with TP), powder coated blue (part ends in TB), powder coated red (part ends in TR), and powder coated silver (ends in TS) among others. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction allowing more air flow to your engine. More air means more usable power and acceleration throughout the engine's RPM range.

    • Brand: K&N
    • ASIN: B002GXGDUU
    • UPC: 024844244468

  • Spectre Performance Cold Air Intake 9900 Kit with Red filter for 1999-2007 GM Truck

    Spectre air intake systems are designed to get the most horsepower and torque from your vehicle while they protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish.

    • Color: Red
    • Brand: Spectre Performance
    • ASIN: B001DBVPY0
    • UPC: 089601990002

  • aFe Power Magnum FORCE 75-12192 Ford F-150 EcoBoost Performance Cold Air Intake System (Oiled, 7-Layer Filter)

    aFe's Stage-2 air Intake system produces an astonishing 32 horsepower and 35lbs. x ft. torque and outflows the factory intake by 44%! This intake is the most sophisticated design on the market today. Our equal length dual tube design with H-pipe balance-tube increases intake air flow and velocity which allows for quicker turbo response, increased horsepower and improved throttle response. The air intake is enclosed in a durable 16-gauge heat shield that utilizes the lower half of the factory air box that requires no assembly. Two 360 degree conical Pro-GUARD 7 air filters provide protection and flow at for maximum performance and are constructed with 100% polyurethane for long life and multiple cleaning cycles. Equal Length Intake Tube - This intake uses a dual intake tube design with an H-Pipe balance tube to balance intake tube pressures and maximize air flow and velocity. Dual 360 Degree Air Filters - This intake utilizes dual oval conical Pro-GUARD 7 performance air filters for maximum flow. These 7-layer progressive, oiled cotton gauze air filter provides maximum protection for increased horsepower and torque. Top Mounted Heat Shield Design - aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation uti...

    • Brand: aFe Power
    • ASIN: B00DLZZ8U8
    • UPC: 802959751350

  • aFe Power 54-32112-B Magnum Force Ford F-150 EcoBoost Performance Intake System (Oiled, 5-Layer Filter)

    High quality tube: this system uses a high quality plastic cad designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Top mounted heat shield design: aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large air filter: large 5-3/4" inverted top conical filter with a 5-1/2" flange opening provides greater airflow over stock intake system. This washable/reusable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque. Hassle-Free installation: all clamps, silicone coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts. Note: this product is not currently carb exempt and is not available for sale in California or for use on any vehicle registered with the California department of motor vehicle.

    • Brand: aFe Power
    • ASIN: B01E58FDSG
    • UPC: 802959505854

  • K&N Performance Cold Air Intake Kit 57-3058 with Lifetime Filter for 2007-2008 Chevrolet GMC Cadillac 4.8L

    The 57 Series Generation II air intake, also referred to as an FIPK, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10%. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with K&N's Million Mile Limited Warranty and are guaranteed to increase power. K&N air intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This translates into more power and torque for your vehicle. The filters on these kits are washable and reusable. Most of our air intake systems are relatively easy to install using tools commonly available.

    • Brand: K&N
    • ASIN: B001DF7LF8
    • UPC: 024844232434

  • K&N Performance Cold Air Intake Kit 63-3087 with Lifetime Filter for GMC Sierra, Chevrolet Silverado 6.6L V8 Duramax Diesel

    The K&N 63-3087 Air Charger air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Silverado 2500 HD / 3500 HD and GMC Sierra 2500 HD / 3500 HD models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3087 air intake comes with a black metal topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's turbo inlet for a guaranteed power gain. The tube accommodates the factory mass air sensor, humidity sensor and filter minder (where equipped). The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and some wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emis...

    • Brand: K&N
    • ASIN: B00UHEMRIM
    • UPC: 024844358660

  • K&N Performance Cold Air Intake Kit 57-2583 with Lifetime Filter for 2011-2014 Ford F150 3.5L V6 Turbo Ecoboost

    The K&N 57-2583 FIPK air intake system replaces the restrictive factory air filter and air intake housing in specific Ford F150 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. This air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's turbo inlet for a guaranteed power gain. The tube accommodates the factory EVAP hose as well as the mass air sensor and pressure sensor where equipped. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches.

    • Brand: K&N
    • ASIN: B017T542SO
    • UPC: 024844361295

  • Spectre 9944 Air Intake Kit for Jeep Wrangler JK 3.8L

    Spectre air intake systems are designed to get the most horsepower and torque from your vehicle while they protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with all necessary boots, clamps and hardware for an OE fit and finish.

    • Color: Red
    • Brand: Spectre Performance
    • ASIN: B005BHXPHW
    • UPC: 089601994406

  • PPE Boost Increase Valve for 01-04 Duramax 6.6L LB7

    Increase your turbo boost pressure from the stock 18-20 psi to 28-30 psi in an easy five minute installation. Designed for 2001-2004 Duramax LB7 diesel engines, the PPE Boost Increase Boost Increase Valve will improve engine performance and reduce those dreaded EGTs.

    • Brand: Pacific Performance Engineering
    • ASIN: B003BGPBG8

  • For Ford Expedition F150 Navigator 5.4L 5.4 Liter V8 High Flow Induction Air Intake System Heat Shield Blue Wrinkle Piping Kit

    Item Condition: Brand New  It's the ultimate performance Air Intake Kit with Heat Shield  The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output  The kit includes a steel heat shield that features a durable powder coating for long lasting good looks  The heat shield protects the filter from dirt and debris and to keep hot underhood air away from the element for a cooler intake air charge It can increase 8-10% of Horsepower and 6-8% of torque  Easy to install and easy to fit with simple tools  No additional parts will be needed for installation after you purchase this kit T-306 Aluminum Red Wrinkle Pipe as shown in the picture High quality built Washable and Reusable Air Filter as shown in the picture  Steel Heat Shield  Scratch Resistance Pipe All necessary mounting hardwares, vacuum hoses and reducers will be included like in the picture NOTES: No Installation Guide. Professional Installation Is Highly Recommended FITMENT: 2007-2014 Ford Expedition 5.4L V8 2009-2010 Ford F150 5.4L V8 2007-2014 Lincoln Navigator 5.4L V8

    • Brand: AJP Distributors
    • ASIN: B078FLXF11

  • SUPERFASTRACING Cold Air Intake Kit For 03-07 Ford 6.0L F-250 F-350 6.0L Powerstroke Diesel 6.0 Blue

    Product Description 100% brand new, never been used Color:Blue All the bends in our aluminum tubes are CNC mandrel bent and engineered for maximum air flow Plus, unlike plastic, aluminum holds up to the wide temperature extremes common in every engine compartment Professional installation in highly recommended (No instruction included) NOTE: Not for sale or use on any pollution controlled vehicle in the state of California Fitment 20 03-2007 FORD F-250 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P" 2003-2007 FORD F-350 SUPER DUTY 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P" 2003-2005 FORD EXCURSION 6.0L 363ci OHV V8 DIESEL TURBO, VIN "P" Package Includes 4" mandrel bent Tube NPT fitting for attaching boost gauge Flared 4 inch clamp end and clamped filter end Conical filter with hose clamp Access port and cover plate with screws and o-rings 4" silicone coupler with hose clamps Silicone hose Installation bracket

    • Color: Cold Air Intake Kit Blue
    • Brand: SUPERFASTRACING
    • ASIN: B07D5T861L

  • Roush 11-14 F150 Cold Air Intake Kit 421238

    Upgrade your 2011-2014 5.0L Ford F-150 with this Cold Air Intake Kit and unleash additional performance of your engine, while increasing your fuel efficiency. The kit features the ROUSH® air filter, air dam, and induction tube. Cold air induction is a more efficient air intake method than the standard air filtering process. As a result, cold air induction can unleash the latent potential in power and fuel efficiency that is normally restrained by your stock air intake. Air first comes into the Air Dam, which keeps out hot air from the engine compartment. The result is that the air entering the filter is cooler and dense, providing for a more potent air charge. The ROUSH air filter media is a synthetic nano-fiber material that traps the smallest dirt particles that ordinary cotton-gauze "performance" filters can't capture. Based on SAE standards, ROUSH air filters capture almost twice the percentage of 2 micron particulates, and more than six times the amount of 0.5 micron particulates than our competitors' filters. Furthermore, ROUSH air filters are constructed using the finest materials available today, featuring a hand-poured urethane body that won't crack, curl or shrink like other rubber or plastisol units used by our competitors. ROUSH air filtration performance is second t...

    • Brand: Roush
    • ASIN: B00BR013SK
    • UPC: 844764212381

  • HPS 27-569WB Wrinkle Black Shortram Post MAF Air Intake Pipe (Cool Short Ram SRI)

    Built for performance and show, the HPS Black post MAF short ram air intake pipe offers a free-flowing 3-1/2" mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains +12. 6 Whip horsepower, +14. 5 Ft/lbs. torque and improve throttle response while maintaining safe air fuel ratio (The dyno result is based on the OEM panel air filter, using other aftermarket panel air filter might have impact on the performance gains). Utilizing a 3-1/2" mandrel-bent aluminum tubing (which is not commonly found in other intake system), HPS Post MAF Air Intake Tube not just increases the overall air intake volume and throttle response, it also fine tune the air intake sound by keeping the Lexus signature sound generator. Compare to the cold air intake, HPS Cool Ram Air Intake Tube is a convenient way to change your intake in case of rainy days where water might be inducted into your cold air system. This HPS post MAF air intake tube works with OEM or any aftermarket brand panel air filter. The included installation instruction has clear pictures and description to guide the installer throughout the whole process (which takes about 30 minutes with simple hand tools). The kit does NOT require tuning and does not trigger CEL light. No modification and no cutting on...

    • Color: Wrinkle Black
    • Brand: HPS
    • ASIN: B01APS09PM
    • UPC: 648044846583