• LASERLINE DIRECT ELEVATION CUT/FILL LENKER GRADE ROD FOR LASER LEVEL

    The Laserline elevation Cut/Fill rods is rugged, versatile, and lightweight. The tape has bold numbers and easy to distinguish Cut/Fill portions. With DuPont® nylon parts, heavy duty matte tape, and U.V. stabilized Detector Rails, you are sure to get a long life out of this piece of equipment. Direct Reading, or True Elevation (also known as Lenker style) is a Grade Rod with a moveable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. The actual true elevation above sea level is read on these rods, thus eliminating errors caused by adding or subtracting. Since no math is involved, grade shots are much faster than conventional style rods. On most jobsites, the bench elevation is typically established by survey, and all elevations on that project are above that or below primary bench elevation. For use with a laser detector. There is a special rail slide and Laserline detector bracket that lets the laser detector travel the full working length of the rod (with an optional bracket) This allows faster and easier readings because it takes the awkwardness out of having to loosen the detector, move the detector, then tighten the detector for each reading.

    • Brand: LaserLine
    • ASIN: B00GMZYMZG
    • UPC: 617401620135

  • LASERLINE DIRECT ELEVATION LENKER GRADE ROD FOR LASER LEVEL

    Laser or optical. These rods are the number one seller in the USA, and there's a reason, tremendous quality. Tough, lightweight, and versatile, our direct reading rods bear the true test of quality in the field, and hold up exceptionally well. The Laserline elevation Cut/Fill rods is rugged, versatile, and lightweight. The tape has bold numbers and easy to distinguish Cut/Fill portions. With DuPont® nylon parts, heavy duty matte tape, and U.V. stabilized Detector Rails, you are sure to get a long life out of this piece of equipment. Direct Reading, or True Elevation (also known as Lenker style) is a Grade Rod with a moveable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. The actual true elevation above sea level is read on these rods, thus eliminating errors caused by adding or subtracting. Since no math is involved, grade shots are much faster than conventional style rods. On most jobsites, the bench elevation is typically established by survey, and all elevations on that project are above that or below primary bench elevation. For use with a laser detector, there is a special rail slide and Laserline detector bracket that lets the laser detector travel the full working length of the rod (with an optional b...

    • Brand: Laserline
    • ASIN: B00GN2UFFO
    • UPC: 617401620142

  • LaserLine 10' Direct Elevation Lenker Grade Rod

    Laser or optical. These rods are the number one seller in the USA, and there's a reason, tremendous quality. Tough, lightweight, and versatile, our direct reading rods bear the true test of quality in the field, and hold up exceptionally well. The Laserline elevation Cut/Fill rods is rugged, versatile, and lightweight. The tape has bold numbers and easy to distinguish Cut/Fill portions. With DuPont® nylon parts, heavy duty matte tape, and U.V. stabilized Detector Rails, you are sure to get a long life out of this piece of equipment. Direct Reading, or True Elevation (also known as Lenker style) is a Grade Rod with a moveable tape face allowing you to set the actual benchmark elevation, or any elevation, above or below the bench into the rod. The actual true elevation above sea level is read on these rods, thus eliminating errors caused by adding or subtracting. Since no math is involved, grade shots are much faster than conventional style rods. On most jobsites, the bench elevation is typically established by survey, and all elevations on that project are above that or below primary bench elevation. For use with a laser detector, there is a special rail slide and Laserline detector bracket that lets the laser detector travel the full working length of the rod (with an optional b...

    • Brand: Laserline Agatec
    • ASIN: B00GN54MKA
    • UPC: 617401620197

  • Compact Self-Leveling Cross Line Laser with Clamp

    The HAMMERHEAD Compact Self-Leveling Cross Line Laser with Adjustable Mounting Clamp projects bright horizontal, vertical or cross lines onto flat surfaces with the accuracy of ±1/4 inch at 30 feet. The unit will self-level when positioned within 4 degrees of level; an LED indicator turns red when the unit is positioned outside of the self-leveling range. In the lock (manual) mode, the cross line laser can be positioned to project lines that are not level or plumb for projects that require them. The included adjustable mounting clamp easily attaches to a variety of surfaces to extend the utility of the tool. The cross line laser may also be mounted on any 1/4" threaded tripod screw. Kit includes: (1) Compact Self-Leveling Cross Line Laser, (1) Adjustable Mounting Clamp and (2) AA Batteries

    • Brand: HAMMERHEAD
    • ASIN: B00OZHIFNS
    • UPC: 692042005343

  • HAMMERHEAD HLCLG01 Green Beam COMPACT Self-Leveling Cross Line Laser with Adjustable Mounting Clamp & Storage Bag

    The HAMMERHEAD Green beam compact self-leveling cross line laser with adjustable mounting clamp projects bright horizontal, vertical or cross Green lines onto Flat surfaces with the accuracy of ±1/4 inch at 30 feet. The unit will self-level when positioned within 4 degrees of level; an LED indicator turns red when the unit is positioned outside of the self-leveling range. In the Lock (manual) mode, the cross line laser can be positioned to project lines in any angle that are not level or plumb for projects that require them. The included adjustable mounting clamp easily attaches to a variety of surfaces to extend the utility of the tool. The cross line laser may also be mounted on any 1/4" threaded tripod screw. Kit includes: (1) compact self-leveling cross line laser, (1) adjustable mounting clamp,(1) soft bag and (2) AA batteries

    • Brand: HAMMERHEAD
    • ASIN: B074H3NLFP
    • UPC: 692042008160

  • Self-Leveling 360-Degree Cross Line Laser

    The HAMMERHEAD Self-Leveling 360-degree Cross Line Laser projects bright, 360-degree horizontal, vertical or cross lines onto surfaces with accuracy of ±1/8 inch at 30 feet. The continuous 360-degree horizontal laser line provides all-around leveling for a full 60 ft. diameter. The unit will self-level when positioned within 4 degrees of level; an LED indicator turns red when the unit is positioned outside of the self-leveling range. In the lock (manual) mode, the cross line laser can be positioned to project lines that are not level or plumb for projects that require them. The cross line laser may be mounted on any 5/8" threaded tripod screw. Kit includes (1) Self-Leveling 360-degree Cross Line Laser, (4) AA Batteries and (1) Soft Bag

    • Brand: HAMMERHEAD
    • ASIN: B00OZHIMBS
    • UPC: 692042005367

  • Kapro 990V-41-48 Zeus Vision Box Level with Dual-View Plumb Vials and Illuminated Horizontal Vial, 48-Inch

    The Kapro 990V-41-24 Zeus Vision box level is 48 inches long and has an accuracy of 0.5 mm/m and a graduation (also called sensitivity) of 60 seconds. The level has three acrylic vials that are shockproof and resistant to damage from ultra-violet rays. Two vertical vials display readings on the front of the level for taking accurate plumb readings from a comfortable position. The horizontal vial is magnified and illuminated for clear readings in dim light. The ergonomic handles are non-slip, and the polypropylene and thermoplastic rubber caps on both ends have shock absorbers that protect the level from damage if dropped. The level is made of aluminum, has a polyester, electrostatic powder coating that is corrosion resistant, and an anti-stick coating for easy cleaning. Specifications Dimensions 2.6 x 48 x 1.2 inches (H x W x D) Accuracy (+/-) 0.5mm/m Graduation 60 minutes Number of vials 2, plumb; 1, level Vial material Acrylic Warranty One-year, limited H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Levels are instruments that determine the true horizontal or vertical plane of a surface. The most common type is the spirit level, ...

    • Brand: ZEUS
    • ASIN: B0037NXVWG
    • UPC: 739632720054