• Opto 22 SAFETY COVER Solid State Relay Cover for Power Series Standard Model

    This Opto 22 safety cover for solid state relays reduces the chance of accidental contact with relay terminals, while providing access holes for test instrumentation. It is made of plastic for protection against conductivity and clips on for simple attachment to the solid state relay. This safety cover is suitable for use with Opto 22 Power series solid state relays. Relay switches (also called an electrical relay or an electrical relay switch) use a small amount of power to control a larger source of power connected to electrical devices such as car motors, computers, and lighting installations. A basic relay switch has a control circuit with an electromagnetic coil and a load circuit with contacts and a lever. When current flows into the relay switch, it moves through the coil and a magnetic field is created, which causes the lever in the load circuit to move between contacts, either turning the device on or off. In a normally open (NO) relay switch, when power is supplied to the relay, the load circuit is closed and the power source connected to the relay is turned on. In a normally closed (NC) relay switch, when power is supplied to the relay, the load circuit is open and the power source connected to the relay is turned off. In other types of relay switches, non-moving parts...

    • Brand: Opto 22
    • ASIN: B0058UZAV6

  • Opto aPAC

    • Brand: Opto 22
    • ASIN: B0083A7MC8

  • OPTO 22 PAC Project Professional Software Suite

    Lab equipment & instruments. Opto 22 PAC project professional software suite. Manufactured by davis instruments. Opto 22 brand products.

    • Brand: Opto 22
    • ASIN: B00481V8US

  • Opto 22 SNAP-PAC-R2 - SNAP PAC R-series Rack-mounted Programmable Automation Controller, Analog/Digital/Serial I/O processing

    The SNAP-PAC-R2 programmable automation controller provides control, communication, and I/O processing in a compact, rack-mounted package. One of four components of the SNAP PAC System, the SNAP-PAC-R2 is fully integrated with PAC Project software, SNAP PAC brains, and SNAP I/O modules. Used with the included PAC Project Basic software suite (or PAC Project Professional, purchased separately), the Ethernet-based SNAP-PAC-R2 can handle almost all your industrial control, remote monitoring, and data acquisition needs. This intelligent, flexible PAC can be used in several ways. The SNAP-PAC-R2 can provide complete cell control on its own rack with I/O modules. It can also control SNAP PAC I/O units at the same time for a larger system. Or the R2 can be used in a more extensive distributed control system as an I/O unit controlled by a SNAP PAC S-series standalone controller. It can even be used as intelligent remote I/O for Allen-Bradley Logix PLC systems, such as ControlLogix and MicroLogix. Two independent, 10/100 Mbps Ethernet network interfaces are included on each SNAP-PAC-R2. These interfaces have separate IP addresses and can be used to segment the control network from the company network or to provide Ethernet link redundancy in case of link failure or maintenance. In additio...

    • Brand: Opto 22
    • ASIN: B0058UW0XM
    • UPC: 013227064472

  • Opto 22 SNAP-PAC-R1 Rack-Mounted Programmable Automation Controller and Analog/Digital/Serial I/O Processor

    The SNAP-PAC-R1 programmable automation controller provides control, communication, and I/O processing in a compact, rack-mounted package. One of four components of the SNAP PAC System, the SNAP-PAC-R1 is fully integrated with PAC Project software, SNAP PAC brains, and SNAP I/O modules. Used with the included PAC Project Basic software suite (or PAC Project Professional, purchased separately), the Ethernet-based SNAP-PAC-R1 can handle almost all your industrial control, remote monitoring, and data acquisition needs. This intelligent, flexible PAC can be used in several ways. The SNAP-PAC-R1 can provide complete cell control on its own rack with I/O modules. It can also control SNAP PAC I/O units at the same time for a larger system. Or the R1 can be used in a more extensive distributed control system as an I/O unit controlled by a SNAP PAC S-series standalone controller. It can even be used as intelligent remote I/O for Allen-Bradley Logix PLC systems, such as ControlLogix and MicroLogix. Two independent, 10/100 Mbps Ethernet network interfaces are included on each SNAP-PAC-R1. These interfaces have separate IP addresses and can be used to segment the control network from the company network or to provide Ethernet link redundancy in case of link failure or maintenance. In additio...

    • Brand: Opto 22
    • ASIN: B0058UVXD0
    • UPC: 013227048960

  • Opto 22 FACTORYFLOOR FactoryFloor Software Suite V4.0

    SNAP controllers work with SNAP I/O systems to provide powerful distributed control in a small footprint. The SNAP-LCM4 is Opto 22’s fastest controller to date, ideal for control and communication to I/O systems, serial devices, motion controllers, and networks. The SNAP-LCM4 features powerful communications capabilities including Ethernet, ARCNET, and serial. Serial ports provide an interface with Opto 22 I/O, radio modems, cellular modems, even satellite communications equipment, as well as any third-party serial device. The SNAP-LCM4 includes built-in diagnostics, a 32-bit Motorola processor, 4 MB RAM, and four expansion slots. The SNAP-LCSX and SNAP-LCSX-PLUS controllers are the cost-effective answer to applications requiring small, powerful, real-time industrial control. Both contain 32-bit processors capable of a wide range of computing functions. The SNAP-LCSX has two COM ports and the SNAP-LCSX-PLUS has four. Each controller has 1 MB of RAM. SNAP controllers are programmed using Opto 22 FactoryFloor, an integrated suite of industrial control software applications designed to help you solve control automation problems, build easy-to-use operator interfaces, and expand your manufacturing systems’ connectivity.

    • Brand: Opto 22
    • ASIN: B00481QPCE

  • NEW OPTO 22 PAC PROJECT 8932 SOFTWARE SUITE R8.0005

    NEW OPTO 22 PAC PROJECT 8932 SOFTWARE SUITE R8.00051012- DRAny questions, please call us at 855-705-0565

    • Brand: Generic
    • ASIN: B01IJDLZRG

  • Module; Snap 8 Channel -20mA to +20mA Analog Current Input

    Overview SNAP I/O modules provide compact, high-density packaging for analog, digital and serial I/O. SNAP I/O includes AC and DC digital modules; current and voltage analog input and output modules; temperature and thermocouple, time-proportional output, power, load cell and rate modules; and modules for communication with serial devices.Features:SNAPs Compact Design Delivers an Overall Space Savings Compared to Traditional I/O, While Packaging Allows Modules to Simply Snap-In PlaceMost SNAP Modules Have Removable Top-Mounted Connectors to Provide Easy Access for Field WiringMost SNAP I/O Modules Are Guaranteed for LifeFactory Mutual (FM) Approved Versions of Many SNAP I/O Modules Are AvailableSNAP Analog Modules Are Software Configurable and Offer Both Optical and Transformer IsolationEach Analog Input Module Offers 15-Bit Resolution for High AccuracyAll Analog Modules Include a Serial Interface for Easy Programmability and Integration into OEM Applications32-Channel SNAP Analog Input Modules Are Ideal for OEMs and Others Who Have High Point-Count Applications or for Those Requiring More Than 64 Analog Points on a Single SNAP I/O RackSpecification:- For Use With : SNAP PAC Brain ; R-Series Controllers Input Type : Analog Current Length : 3.25" (82.55mm) Module Type : Input ...

    • Brand: opto-22
    • ASIN: B07PV97YYZ

  • Opto 22 E1 16 Channel Digital Optomux Brain Board for Serial and Ethernet Networks, 5.0-5.2 VDC at 0.5 Amps

    E1 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. The E1 connects to a rack of Opto 22 G1, G4, or Quad Pak digital I/O modules, while the E2 connects to a rack of Opto 22 G1 analog I/O modules. Each brain board communicates with a host computer and performs control functions for each I/O point. Designed as drop-in replacements for Opto 22's serial-based B1 brain boards, E1 brain boards connect to standard 10/100 Mbps Ethernet networks while including support for serial Optomux-based networks. Power Requirements: 5.0-5.2 VDC at 0.5 amps (excludes digital and analog module power requirements). Operating temperature: 0 degree C to 70 degree C. Storage temperature: -40 degree C to 85 degree C. Humidity: 0-95 percent humidity, non-condensing. Ethernet network interface: terminal block; E2: Terminal block (on mounting rack), Data rates: 300, 600, 1200, 2400, 4800, 9600, 19200, and 38400 baud, Supported protocols: Optomux, Network Range: Up to 32 Optomux stations configured for multidrop can be used on a serial network of up to 1524 m (5000 ft.) total length. Up to 256 Optomux stations and longer line lengths can be used by installing network repeaters. Up to 256 Optomux stations configured for repeat mode can exist on a network. Ana...

    • Brand: Opto 22
    • ASIN: B0058UYA6C

  • Opto 22 PCI-AC51 PCI Bus to Pamux Bus Adapter Card

    The PCI-AC51 is a high-speed adapter card designed to link the Pamux bus to PCI-compatible computers. The PCI-AC51 is compatible with computers that feature a standard 33 MHz PCI bus. It is ideal for customers who have been using Opto 22's AC28 adapter card but must upgrade to a newer PC that uses the PCI rather than the ISA bus. (Note: the PCI-AC28 adapter card is not recommended for new designs.) Each PCI-AC51 can access up to 512 points of I/O along a Pamux bus of up to 500 feet in length. The PCI-AC51 includes a 50-pin male header connector and is compatible with HH-series and OD-series flat-ribbon cable. The card operates at temperatures of 0 to 70 degree C. Configuration is jumperless, and four LEDs on the card indicate card operation. A software toolkit is provided for the adapter card. The toolkit works with Microsoft Windows 2000 and Windows XP. The toolkit provides a set of functions that can be used with Microsoft Visual Basic 6.0 or Microsoft C++ 6.0.

    • Brand: Opto 22
    • ASIN: B0058UZ9IA

  • NEW OPTO 22 PAC PROJECT 8932 SOFTWARE SUITE R8.0005

    NEW OPTO 22 PAC PROJECT 8932 SOFTWARE SUITE R8.00051012- DRAny questions, please call us at 855-705-0565

    • Brand: Generic
    • ASIN: B073ZL24S6

  • Hobbywing XRotor Pro 50A (2pcs, wire leaded)

    Specs: Constant current: 50A Burst Current: 70A (10 seconds) BEC Mode: No BEC (OPTO) Lipo Cells: 4~6S (12.8~22.6V) Power lead length: 380mm Signal lead length: 520mm Motor lead length: 75mm Size: 48 x 30 x 16mm Weight: 56g Included: Hobbywing XRotor Pro 50A OPTO Muti-rotor ESC Cable tie Manual Features: • Super-efficient ESC • Driving Efficiency Optimization function • Integral LEDs • Long leads for simple installation • Programmable items: LED status, LED color, DEO function & motor rotation - All settings except the timing are pre-set, making using the Esc simple and versatile. Crosstalk from the extra-long signal wires is effectively reduced by twisting the wires instead of laying them parallel which again, helps to simplify installation and improve the flight characteristics of your multi-rotor. Most flight controllers are compatible with the XRotor Pro series which supports signal frequencies of up to 621Hz (anything over 500Hz is non-standard.) The high performance of the drive chip is enhanced further by the use of extra low-resistance MOSFETs that also allow high currents to be held stable for longer.

    • Color: Black
    • Brand: Hobbywing
    • ASIN: B01K5LY73O

  • Opto 22 SNAP-PAC-S1 - SNAP PAC S-series Standalone Programmable Automation Controller for Ethernet Networks

    The SNAP-PAC-S1 programmable automation controller provides powerful, real-time control and communications to meet your industrial control, monitoring and data acquisition needs. One of the four components of the SNAP PAC System, the SNAP-PAC-S1 is fully integrated with PAC Project software, SNAP PAC brains, and SNAP I/O modules to form a complete control system. The SNAP PAC System includes digital and analog control, serial string handling, PID loops and enterprise connectivity. The SNAP-PAC-S1 controller is compact and industrially hardened. It includes two independent Ethernet network interfaces with separate IP addresses, which can be used to segment the control network from the company network or for redundant Ethernet links. You can also set up a system with redundant controllers using two identical S-series controllers, the SNAP PAC Redundancy Option Kit, and PAC Project Professional 9.0 or newer. The SNAP-PAC-S1 also has three serial ports: an RS-232 port with full hardware handshaking, ideal for PPP communication using a modem; another RS-232 port for connecting directly to serial devices; and an RS-485 port for connecting to SNAP PAC Serial brains or to legacy mistic I/O units. Connecting to Opto 22 serial- and Ethernet-based I/O systems, a SNAP PAC S-series controller...

    • Brand: Opto 22
    • ASIN: B0058UW7S0

  • DIO-144: 144-Bit OPTO-22 DIO ISA Board with 144 TTL Digital I/O Lines and Software Development Kit

    144-Bit OPTO-22 DIO ISA Board with 144 TTL Digital I/O Lines and Software Development Kit. Can be used to Control Relays and LED's. Has 2 input lines for interrupts. Supports operating temperatures from 0 ~ 60 ???C

    • Brand: ICP DAS
    • ASIN: B00N258DB8

  • Controller; Rack Mount; Analog and FullDigital; Serial; FM Approved

    Overview The SNAP-PAC-R1-FM programmable automation controller provides control, communication, and I/O processing in a compact, rack-mounted package. One of four components of the SNAP PAC System, the SNAP-PAC-R1-FM is fully integrated with PAC Project software, SNAP PAC brains, and SNAP I/O modules. Used with the included PAC Project Basic software suite (or PAC Project Professional, purchased separately), the Ethernet-based SNAP-PAC-R1-FM can handle almost all your industrial control, remote monitoring, and data acquisition needs.Specification:- Depth : 0.276" (7mm) Dimensions : 84.15 x 44.44 x 106.375 mm For Use With : Ethernet Network ; I/O Rack Input Type : Analog ; Digital ; Serial Length : 3.312" (84.15mm) Memory Type : 32 MB Total RAM, 2 MB Battery-Backed RAM, 8 MB Flash Mounting Type : Rack Output Type : Analog, Digital, Serial Primary Type : Controller Series : SNAP PAC Series Special Features : Full Featured Controlled, HMI Software Included, LAN Network, Micro SD Card Slot for Removable Data Storage, Modem Communication using PPP, Two Independent 10/100 Mbps Ethernet Network Interface Standards : CE Marked ; DFARS ; RoHS Compliant Supply Voltage : 5-5.2 VDC Temperature, Operating, Maximum : 60 C Temperature, Operating, Minimum : 0 C Temperature, Operat...

    • Brand: opto-22
    • ASIN: B07NKVFKG5