• AGPtek® Digital Satellite Signal Finder Meter for Dish Network Directv FTA with Compass and Audio Tone

    Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satfinder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout .Package Included:1* Instructions1* Digital Satillite Signal Finder MeterTrademark AGPtek products are marketed exclusively by Brainydeal

    • Color: Silver grey
    • Brand: AGPTEK
    • ASIN: B0083S4Q8S
    • UPC: 848454018222

  • Dish Network 1000.2 & Satellite Finder Compass - 110, 119, 129 Satellites High Definition Dish Triple DPP LNB

    Package includes: LNBF 1000.2 (129,119,110), Dish 1000.2 Backing structure, Dish 1000.2 reflector (Can be Gray or Black), Dish 1000.2 integrated LNBF Bracket, Dish 1000.2 Mast/Foot Assy, Manual, Hardware Pack, Analog Satellite Finder

    • Brand: Dish Network
    • ASIN: B01IU2B49A

  • AGPtek Good For Campers Digital Satellite Signal Meter Finder Meter For Dish Network Directv FTA LCD Graphic Display Backlight Compass Buzzer Control

    Description: Very powerful Digital Satellite Signal Meter Finder which is able to find satellites in a very quick way about within 15 minutes if no accident. It is very lightweighted and compact,very convenient to use.Anti-corrosion connectors also make sure long time use and it is very worthy of trying. Specification: Input Frequency: 950-2150 MHz Input Level Min: -40dBm Input Level Max: -10dBm Input Impedance: 75Ω, F connector Output Impedance: 75Ω, F connector Power Supply: DC 13/18 V Operating Range (LNB gain): 52-60dB Package Included: 1* Instructions 1* Digital Satellite Signal Meter Finder 1* Compass for free Q &A: 1. how to install the satelite finder and detect the signal? a>. Connect a jump cable from LNB to the satellite finder's "Satellite" port. Connect the "Receiver" port, a DC 1318V power which comes from the satellite receiver b>. Make sure that the satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver c> Set the dB to be 1 or 2 by ATT button, the signal LED will show from 15 to 30, then you can adjust the dish postition, when you hear the buzzer alert and the value of signal strength getting more and more, it means you get the statellite signal d>. Set the dB to be 3 or 4, adjust the dish again and again until the val...

    • Brand: AGPTEK
    • ASIN: B00NL4DYSC
    • UPC: 700697094930

  • Steren 203-661 Electronics Antennas

    Avoid losing your satellite signal and ensure that you are placing your satellite dish for maximum clarity with the Steren Inclinometer/Compass Satellite Angle Finder. This efficient and useful tool allows you to measure elevation and azimuth so you know the best possible place to install your satellite dish and ensure that obstructions do not mar your signal. Adjustable eyepieces make this tool comfortable to use and allows you to be as precise as possible when taking measurements. A handy protective carrying case makes this tool easy to use and transport.

    • Color: Gray
    • Brand: Steren
    • ASIN: B00CUXIZZC
    • UPC: 884645134449

  • Pink Lizard SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass

    Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features : Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by pressing the "ATT" keys. C...

    • Brand: Pink Lizard Products
    • ASIN: B01HMF7QFW

  • Satellite Finder

    Easily locate your satellite signal. Connects to your digital satellite line to easily calibrate the optimum signal. SF-95 is a satellite finder that helps to make precise dish set-up easily. Its ultimate sensitivity will indicate 0.2 dB level difference in 950 to 2050MHz. SF-95 is miniature (3.03" x 2.36" x 1.10") and light weight (95 gm). Now with H/V and 22KHz indicators. SF-95: Iindicator lights for verifiying that your receiver is set to Horizontal or Vertical polarity and if 22KHz tone is on or off. Green H/V light indicates Vertical Polarity. Red H/V light indicates Horizontal Polarity. Red 22KHz light indicates 22KHz is ON. When aligning a C-band dish do not use your meter in front of the dish to avoid full scale readings. When connecting to a LNBF with gain higher than 65dB, insert a 5dB attenuator between the meter and the LNBF. If a attenuator is not available you may use a long coax (60 feet or more) between the meter and the LNBF. If the meter needle is jumping the sensitivity is too high. Adjust the S.A. level on the back of the meter by punching through the label where marked. Be very careful not to damage the adjustment by turning it too far or too hard.

    • Brand: Satellite Finder
    • ASIN: B000JG6018

  • Satellite Signal Meter - Satellite Signal Finder - SF-95DR Digital Satellite Signal Meter Finder Dish Network FTA BUZZER with Compass (Satellite Finder Signal Meter)

    Satellite Signal Meter - Satellite Signal Finder - Satellite Finder Signal Meter | Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network FTA BUZZER with Compass Features :   Professional digital satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance results without a second helper. Built-in electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incomin...

    • Brand: Unknown
    • ASIN: B07F69MTWM
    • UPC: 634790682124

  • SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass

    Description:: : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features : Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by pressing the "ATT" key...

    • Color: NA
    • Brand: BephaMart
    • ASIN: B01BAJ2WA0
    • UPC: 615867624810

  • C&C Products SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass

    Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features : Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by pressing the "ATT" keys. C...

    • Brand: C & C
    • ASIN: B01N6X7X2V

  • SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass

    Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features :     Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer . Bulit-in compass . LED backlight display. LNB connecting port and receiver connecting port. S pecification :   Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray .   How to C onnect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder.   O peration : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by ...

    • Brand: Artee Shop
    • ASIN: B01LXMARAU