• Bommer 7800 Series Cast Steel Horizontal Type Medium Duty Spring Pivot with Floor Plate, Steel Side Plate, 1.37"-1.75" Door Thickness, Satin Brass Finish

    Bommer 7811 Spring pivots are horizontal type with floor plate and hold open in both directions. The Bommer 7811 Spring Pivots are a medium duty model for use with doors up to 90 lbs.

    • Brand: Bommer
    • ASIN: B00EOCQ8WY
    • UPC: 098398082647

  • Bommer 7800 Series Cast Steel Horizontal Type Medium Duty Spring Pivot with Floor Plate, Steel Side Plate, 1.37"-1.75" Door Thickness, Bright Black Japanned Finish

    Bommer 7811 Spring pivots are horizontal type with floor plate and hold open in both directions. The Bommer 7811 Spring Pivots are a medium duty model for use with doors up to 90 lbs.

    • Brand: Bommer
    • ASIN: B00EOCQ4V4
    • UPC: 098398046847

  • Standard Duty Swinging Door Floor Hinge With Plated-Steel Cover Plates In Satin Chrome

    A pivoting door between the dining room and kitchen is one of the most charming and practical features of vintage homes! This old-fashioned double acting floor hinge allows your door to swing up to 116 degrees in each direction, and stop open at 88 and 116 degrees. The spring tension is easily adjusted to regulate the closing speed. A top pivot and a pair of plated steel plates, designed to cover the hinge cut-out at the base of your door, are included.This heavy-duty hinge is designed for doors between 1 1/4" and 1 3/4" thick, with a maximum weight of 70 lbs.Dimensions. Floor bracket: 3 1/2" L x 2 7/8" W. Door cut out: 7 3/4" W x 1 1/2" H. Cover plates: 10 1/2" W x 2 1/2" H.

    • Color: Satin Chrome
    • Brand: House of Antique Hardware, Inc.
    • ASIN: B005TQD340

  • Black Pivot Hinges with Bushing Top and Bottom 2 Sets

    Pivot Hinges differ from other hinges in that they pivot around a point rather than along a longer hinge pin. They can be made for inset doors, overlay doors and even partial inset doors. Some pivot hinges can be installed as concealed hinges.

    • Color: Black
    • Brand: Wynn Works
    • ASIN: B074DG72C5
    • UPC: 744881745178

  • Ranbo Commercial Grade 304 Stainless Steel Ball Bearing Heavy Duty Double Action Spring Loaded Door Swing gate Hinge for Saloon Western Bar Pub Swinging Café Doors 3 x 5 inch(Pack of 2)

    Item Descriptions: -100% Brand New And Heavy Duty -Spring power adjustable -Double action hinge for swing doors, both direction opening -Exquisite craft, product was beautiful, good finish and nice -High quality stainless steel, compact, durable -Multi-layer processing, to ensure products do not rust, easy to wear, corrosion ability -Widely used for free gate, bar counter doors. Events door hinge with double door function -Bearings with adjusted intensity, for a variety of materials swing door -Suitable Door Thickness: 2.5-4.4cm Package: Double Action Spring Hinge x2 Item Specifications: Material:304 stainless steel Thickness:2 mm Type:Door Hinges MPN:Does not apply

    • Color: 3 inch
    • Brand: Ranbo
    • ASIN: B078X9W1XD
    • UPC: 651312823025

  • New Life 9-1135 Bi-Fold Door Top Pivot with Roller 3/4-Inch Wheel (2 - Pack)

    This bi-fold door top mount pivot pin is designed to make hanging your bi-fold doors easy and it functions as a hinge. It is constructed by nylon plastic body, with a spring loaded metal pin to make hanging your bi-fold doors easy. It's very easy to install, remove, and re-install your door. It fits on 1 in. to 1.375 in. thick bi-fold door. The pivot metal pin's diameter is 1/4 in. and the nylon plastic base's diameter is 7/16 in. This comes with a nylon roller, that goes at the top of the metal pin, to smoothly slide in the top track. Colours may vary. Size: Pivot Pin with Wheel: 1 inch diameter Nylon Pivot Base: 7/16 inch diameter Weight: 0.066 lbs

    • Brand: newlifeapp
    • ASIN: B00HXKN048
    • UPC: 617353859713

  • 4 YOUNGDALE #65 Antique Brass 1/2 Overlay 1/2-3/4" Thick Door Concealed Snap Close Cabinet Hinges Frameless Framed Face Bumpers Screws Easy Simple Installation Table Saw Plunge Router Notch Embedded

    WARNING: REQUIRES NOTCHING CABINET DOOR! Please see Charts for possible configurations and door opening angles. MAKE sure you analyze carefully the door thicknesses and angles to determine correct hinge to buy. Please DO NOT buy these unless you are replacing YOUNGDALE hinges (number stamped on existing hinge) OR you are willing to notch your doors with table saw or plunge router. THESE ARE NOT BOLT ON hinges! TABLE SAW installation method leaves a tiny notch exposed on the edge of the door where the elbow of the hinge will be visible and flush with edge of door for a nice look. For 100% concealed look you must use a PLUNGE ROUTER and leave approx. 1/16" of wood uncut on the outer edge of door The Youngdale hinge is considered the best and easiest to install concealed hinges made in America today. They are also the LONGEST LASTING and require zero maintenance or adjustments over time. These have been featured in award-winning kitchens and top quality cabinet productions from several leading manufacturers. Youngdale Hinge Company hinges are 100% made and finished in the USA since 1964. These are an excellent alternative to European style hinges if you want a concealed hinge look without major wood cutting. New installations are much easier than European style hinges. A table saw a...

    • Brand: Youngdale
    • ASIN: B075SRF8D4
    • UPC: 700424799169

  • Ranbo 304 Stainless Steel Ball Bearing Heavy Duty Double Action Spring Loaded Door Swing Hinge,Automatic Closing/self Closer/Adjustable Tension Brushed Chrome(Pack of 2) Thickness 3 mm (5 inch)

    Describe: High quality stainless steel: Made of purified stainless steel, brushed finish surface, simple and fashionable design,combines rugged reliability with classic and never rust. 3mm thickened material: High cost of material to ensure the long service lives of our products. High quality Bearing: Advanced German technology,high-quality stainless steel, strong and durable, with rolling bearing built-in,increase the effectiveness of quiet. Accessory mounting screws: Mounting screws will be packaged as a gift when you purchase our products. Features: Thickness: 0.12inch/ 3mm Dimensions: 5inch/ 127mm Apply for door thickness: 3 cm-4.6 cm / 1.2 inch-1.81 inch Maximum door width: 70-85cm / 27.56-33.46inch 20mm bearing, firm and durable, can guarantee the comfortable feeling and the mute effect Material: Stainless steel Surface finish: Satin stainless steel Available for: Various wood doors Characteristic: Ball bearing, smoothly opening and closing, mute Package Weight: 1.6kg / 3.5lb Package included: 2pcs hinge 20 x Mounting screws

    • Color: 5inch
    • Brand: Ranbo
    • ASIN: B07D2XX4JR
    • UPC: 735935186238

  • New Life 9-1106-S Bi-Fold Door Top Pivot, Spring Loaded, Nylon 3/8 inch (Pack of 2)

    This bi-fold door top mount pivot pin is designed to make hanging your bi-fold doors easy and it functions as a hinge. It is constructed by nylon plastic body, with a spring loaded metal pin to make hanging your bi-fold doors easy. It's very easy to install, remove, and reinstall your door. It fits on 1 in. to 1.375in. thick bi-fold door. Colours may vary. Size: Pivot Pin: 1/4 inch diameter Nylon Base: 3/8 inch diameter Weight: 0.035 lbs

    • Brand: newlifeapp
    • ASIN: B00HXKN0F2
    • UPC: 617353859737

  • Bommer 7800 Series Cast Steel Horizontal Type Medium Duty Spring Pivot with Floor Plate, Steel Side Plate, 1.37"-1.75" Door Thickness, Satin Nickel Finish

    Bommer 7811 Spring pivots are horizontal type with floor plate and hold open in both directions. The Bommer 7811 Spring Pivots are a medium duty model for use with doors up to 90 lbs.

    • Brand: Bommer
    • ASIN: B00EOCQFTU
    • UPC: 098398082708