• MCIGICM 0.28" LED Voltmeter Ammeter, Red and Blue Digital Multimeter Display Voltage Current Tester,DC 0-100V 10A Detector Voltage Current Meter Panel Amp Volt Gauge

    Features: Operating voltage:DC 4.5 - 30V Measure voltage: DC 0 - 100V Minimum resolution(V): 0.1V Measure current :10A (measure directly,built-in shunt) Minimum resolution(A): 0.01A Operating current:

    • Color: red,blue
    • Brand: MCIGICM
    • ASIN: B06XR2XKNT
    • UPC: 724190025246

  • bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

    Main Specifications: Working voltage: DC 6.5 ~ 100V Measuring Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Store Energy data when power off. Can be reset to 0. The blue backlight can be turned on/off manually Test Range and Display format: 1.Active Power test range: 0~10kW 2.Energy test range: 0~9999kWh 3.Voltage test range: DC 6.5~100V 4.Current test range: 0~ 100A Precautions 1. This module is only suitable for 6.5~100V DC power. 2. Applied load should not exceed the rated power. 3. Wiring order cannot be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x DC 6.5-100V 100A Power Multimeter

    • Brand: bayite
    • ASIN: B013PKYILS
    • UPC: 711463670166

  • AstroAI Digital Multimeter with Ohm Volt Amp and Diode Voltage Tester Meter (Intelligent Anti-burn)

    The Astro AI AM33D Multimeter is designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's easy and safe to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing, which is both for automotive and household uses. Use this multimeter for: household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more. Note: 1. When the Meter is working at an effective voltage over 60V in DC or 30V rms in AC, special care should be taken because there is a danger of electric shock. 2. Before using the Meter, inspect the exterior casing. Do not use the Meter if it is damaged or if all or part of the exterior casing is removed. Look for cracks or missing plastic. Pay special attention to the insulation around the connectors. 3. If you have mistakenly connected the red test lead to the 500mA selection, then used this meter to test larger current(like 10A) or higher voltage, it might probably burn out the wires even the meter. 4. If you are the beginner, you should have known some basic physical concepts and basic methods of using a meter, you also should have read the user manual carefully and kn...

    • Color: Red
    • Brand: AstroAI
    • ASIN: B01ISAMUA6
    • UPC: 756910381981

  • DROK 80-300V 100A Voltmeter Ammeter Display Panel

    Parameters: Measuring range: AC 80.0-300V; AC 0-100.0A Measuring accuracy: 1% ± 2digits Voltage display: Yellow LCD Current display: Blue LCD Size: 70*39*40mm Wiring: Green terminal: Voltage input Blue terminal: Current transformer secondary input Note: Please passing the wire of the measuring circuit through the hole of transformer. Important: 1. Voltage input (yellow terminal) and current transformer secondary input (blue terminal) cannot be connected to be wrong, otherwise the instrument will be burned out. 2. It is only suitable for pure AC 50Hz-electric power supply. The meter will get permanent damage if you measure the square wave, dc-to-ac inverter output and modified sine wave. Package Includes: 1x Digital Voltage & Current Meter 1x Current Transformer

    • Brand: DROK
    • ASIN: B06XXBDCY9

  • MICTUNING DC 6.5-100V 0-100A LCD Digital Display Ammeter Voltmeter Multimeter Volt Watt Power Energy Meter Blue with 100A 75mV Shunt

    MICTUNING 4-in-1 DC Multimeter MICTUNING DC multimeter is able to measure voltage, current, power and energy of most electrical devices (100A max.), which features high accuracy, low power consumption and easy reading large display. It also functions beyond voltage alarm, energy value reset, data storage, backlight control and measuring range option, suitable used for RV battery, voltage regulator, device detection and replacing various pointer-type electric meters. Specification Working Voltage: 6.5-100V/DC Power Rating: 100A/10000W Measuring Accuracy: 1.0 grade Power Consumption: 0.2W Measuring Speed: 2 times/s Net Weight: 190g/0.42lb/6.70oz Materials: LCD display + PC shell Meter Dimensions: 9.0x5.0x2.4cm/3.5x2.0x0.9 in Shunt Dimensions: 10.5x3.0x2.2cm/4.1x1.2x0.9 in Display format: 1. Power: 0-10KW Test Range, within 1KW, 0.0-999.9W; 1KW and above, 1000-9999W 2. Energy: 0-9999KWh Test Range, within 10KWh, 0-9999Wh; 10KWh and above, 10-9999KWh 3. Voltage: 6.5-100V, it shows 6.50-99.99V 4. Current: 0-100A, it shows 0.00-99.99A Notices: 1. Wiring order cannot be wrong. 2. This meter is suitable for indoor use ONLY. 3. Applied load should not exceed the rated power or current. 4. "Zero current" and "All 888s display" are mostly caused by wrong wiring. 5. Need a pointing tool to p...

    • Color: Black
    • Brand: MICTUNING
    • ASIN: B01JOUZELG
    • UPC: 608613233435

  • ELEGIANT AC 80-260V 100A Digital Current Voltage Amperage LCD Power Panel Meter Power Energy Meter Ammeter Voltmeter AC Volt Amp Testing Gauge Monitor

    Specification Size: 90x50x25mm Apply to power grid voltage range:110V-220V Working voltage: 80 ~ 260VAC Test voltage:80 ~ 260VAC Rated power:100A / 22000W Working Frequency: 45-65Hz Measurement accuracy:1.0 Feature network voltage direct power supply, no external power supply, measurement precision, large-screen LCD liquid crystal screen display clearly. A. Function 1.Electrical parameter measurement function (voltage, current, active power, power). 2. Overload alarm function (over power alarm threshold, the backlight and power flicker tips). 3. The power alarm threshold preset function (can set up their own power alarm threshold).4. The power button clear function. 5. Power-down data storage function. 6. Large-screen LCD screen full display function (display voltage, current, active power, power). 7. Backlight. B. display and key Display Interface Display voltage, current, power, energy parameters from the large-screen LCD screen simultaneously. C.Display Format 1. Power: measurement range 0 ~ 22kW 1kW display format within 0.0 ~ 999.9W; From 1kW display format 1000 ~ 9999W; 10kW above the display format 10.0 ~ 22.0kW. 2. Power: measurement range 0 ~ 9999kWh 10kWh within the display format 0 ~ 9999Wh; Above 10kWh display format 10 ~ 9999kWh; 3. Voltage: Test Range 80 ~...

    • Brand: ELEGIANT
    • ASIN: B06XRW1ZHK

  • Voltage Current Display, DROK DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, 0-50A Volt Tester Meter Amp Detector, LED Voltage Amperage Monitor Gauge with Shunt for Automotive Motor Battery

    DROK DC 4.5-100V 0-50A Volt Amp Meter Parameters: Voltage Measuring Range: DC 4.5-100V Voltage Resolution: 0.01V under 10V; 0.1V between 10V and 100V Current Measuring Range: 0.0-50.0A (If the current is higher than 20A, a shunt is required, or the meter will burn) Current Resolution: 0.1A Display: 0.39" LED dual display Measuring Rate: ≥500mS/time Measurement Accuracy: 1% (±1 digit) Opening Size: 68*38mm Dimension: 70*40*30mm Shunt: 50A/75mV Extreme Working Condition: Working Temperature: -10℃~+65℃ Working Humidity: 10~80% ( No Condensation) Working Air Pressure: 80~106kPa Sunlight: No direct exposure Connecting Method: COM: Common terminal of power supply negative pole V+: Positive pole of tested voltage, positive pole input terminal of power supply A+: Positive pole input terminal of tested current ( This meter adopts common-ground design that earth wire of measuring terminal is interlinked with earth wire of power supply, so A+ can only be connected between the tested device negative pole and power supply negative pole. The meter will burn if connected wrong.) Note: If the meter is used as voltmeter, it is suggested that the yellow wire and black wire are connected together. Note: If the current cannot display properly, please check whether...

    • Brand: DROK
    • ASIN: B07QVXXGVR

  • Etekcity Digital Multimeter, Amp Volt Ohm Voltage Tester Meter with Diode and Continuity Test, Dual Fused for Anti-Burn, MSR-R500

    Do It All, and Then Some The Etekcity MSR-R500 Digital Multimeter is a practical tool for electricians, hobbyists, and general household use. It is easy to operate and features many different functions for measuring current, voltage, and resistance, as well as continuity, transistor, and diode testing. It can be used to diagnose, assemble, and repair circuitry and wiring. Other features include a low battery indicator, continuity buzzer, and overload protection. It's tough rubber sleeve protects it from the drops and falls associated with the toughest jobs.   Built for Everyday Use A Data Hold function keeps the measurements displayed on the MSR-R500 while you record them and a larger display makes the MSR-R500 multimeter even easier to read. Add in the LCD backlight and protective rubber bumper and this is the meter for every job.   Specifications Safety/Compliances: IEC61010 CAT.I 600V, CAT.II 300V, double insulation Max.display: 1999, 3 1/2 digits Range selection: Manual ranging Overload display: Display OL Sampling Speed: 2 times per second Power: 1 x 9V 6F22 Battery Included (Low Battery Indication) Diode Test: Yes Continuity Test: Yes Square Wave Output: Yes Dimensions: 5.1" x 2.9" x 1.4" DC Voltage: 200mV/2000mV/20V/200V ± (0.5%+2), 500V (0.8%+2)  AC Voltage: 200V/500V...

    • Color: Red
    • Brand: Etekcity
    • ASIN: B01N9QW620
    • UPC: 817915020210

  • DROK DC 0-90V 100A Volt Amp Power Watt Capacity Time Meter

    Parameters: Current Measurement Range: 0~100 A Voltage Measurement Range: 10~90 V Display Resolution: 0.1A Current Precision: ± 3% ± 5 digits Voltage Precision: ±2%±5digits Measurement rate: 5time/second Open Holes (mm): 76.5*39.2(mm) Size: 79×43×52(mm) Protection Functions: OVP ( Over-voltage protections): 0.01V~90V OPP( Over-power protections ): 0.01W~9.99KW LOP( undervoltage protection): 0.01V~90V OCP( Over-current protections ): 0.1~100A OAH( Over-charge protection ): 0.01AH~9999AH OFT( Over-time protection ): 1min~99hour59min Package Includes: 1* Multifunctional Bidirectional Meter 1*Hall Sensor

    • Brand: DROK
    • ASIN: B01MZIAJI0

  • Eiechip0.28"LED Digital Voltmeter Ammeter DC Digital Multimeter 100V 10A Blue Red LED Amp Dual Digital display Volt Meter Gauge Car Current Monitor Tester

    Features: Operating voltage:DC 4.5 ~ 30V Measure voltage: DC 0 ~ 100V Minimum resolution(V): 0.1V Measure current :2A (measure directly,built-in shunt) Minimum resolution(A): 0.01A Operating current:

    • Brand: Eiechip
    • ASIN: B079L33VG2
    • UPC: 669591129264

  • HiLetgo 2pcs Accurate Voltmeter Ammeter DC0-100V Voltage 10A Current Meter 2-in-1 Digital Multimeter 10A Volt Amp Tester Meter with 5 Wires 0.28" Red and Blue Dual LED Display

    HiLetgo 2pcs Accurate Voltmeter Ammeter DC0-100V Voltage 10A Current Meter 2-in-1 Digital Multimeter 10A Volt Amp Tester Meter with 5 Wires 0.28" Red and Blue Dual LED Display Specifications: Working voltage:4-30V DC Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning Working current:â?¤20mA Display: 0.28" Two color blue and red Measuring range: DC 0-100V 0-10A Minimum resolution (V): 0.1V Refresh rate: 100mS / times Measure accuracy: 1% Minimum resolution (A): 0.01A Operating temperature: -15 to 70°c Working pressure: 80 to 106 kPa size :48x29x21 mm/1.88*1.14*0.82 inch Package Included: 2* DC 100V 10A Voltmeter Ammeter Blue + Red LED Dual Digital Volt Amp Meter Gauge

    • Color: Red Blue
    • Brand: HiLetgo
    • ASIN: B072BY4XZ7

  • DROK 100014 0.28"LED DC0-100V 10A Digital voltmeter Ammeter 2in1 Multimeter 12V/24V Voltage Amperage Meter Volt Amp Gauge Panel

    Features: Operating voltage:DC 4.5 - 30V Measure voltage: DC 0 - 100V Minimum resolution(V): 0.1V Measure current :10A (measure directly,built-in shunt) Minimum resolution(A): 0.01A Operating current: Dimensions: 48 x 29 x 21mm Mounting cutout: 45.5 x 26.5mm Refresh rate: about 500mS / times Measure accuracy: 1% (± 1 digit) Operating temperature: -10 to 65° c Operating Humidity: 10 to 80% (non-condensing) Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement Wiring: Black line (thin): vacant or buck circuit (module) negative Red line (thin): power supply+ Black line (thick): COM, common measuring Red line (thick): PW+, measuring terminal voltage input positive Yellow line (thick): IN+, current input+ (Please refer to the wiring diagrams for more details) Notice: The voltage between the thin red and thin black lines must be within DC 4.5-30V The ammeter can only be connected to the negative of the device under test 10A below ammeter (include 10A), built-in shunt, does not require external shunt When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits If just be used as a voltmeter, it is recommended that the yellow line and the blac...

    • Brand: DROK
    • ASIN: B00BYKRETK
    • UPC: 519397026680

  • Neoteck Digital Multimeter, Pocket Backlight Multimeter Voltmeter Ammeter Ohmmeter AC/DC Voltage DC Current Resistance Diodes Transistor Audible Continuity Tester

    All Neoteck Product Comes With 18 Months US Base Warranty Overview: This Multimeter can be used for AC/DC voltage test, DC current test, electric current resistance, hfe (DC amplification) test, Frequency test, two-electrode valve test, NPN PNP transistor test, etc. You can use the Multimeter in more places, such as factory, school lab, home hobby, machine repairing, etc. Specification: 15mm high LCD Display Max display: 2000, Auto polarity display Portable and compact design, overload protection on all ranges Diode assembly test/Transistor P-N junction test/Transistor HFE test Continuity test with buzzer sound in circuit Low battery voltage indication DC Voltage: 200mV/2V/20V/200V ±0.5%, 600V ±0.8% AC Voltage: 200V/600V ±1.2% DC Current: 200μA/2mA/20mA ±1%, 200mA ±1.5%, 10A ±3% Resistance: 200ω/2Kω/20Kω/200Kω/2Mω ±0.8% Fuse protection: F-200mA/250V Operating Temperature: -0℃ to 40℃ Over Range Indication: Only figure "1" on the display Polarity Indication: "-" displayed for negative polarity Low Battery Indication: - /+ display Battery: 9V Dimension: Approx 138mm x 69mm x 31mm Package Included: 1 x LCD Digital Multimeter Pair Test Leads Pair Banana Plug to Alligator Clip Cables1 x Orange Back Cover 1 x Manual 1 x 9V Volt Battery

    • Color: Orange
    • Brand: Neoteck
    • ASIN: B01N4Q3HHO

  • INNOVA 3320 Auto-Ranging Digital Multimeter

    The INNOVA 3320 is a Auto-Ranging Multimeter designed to safely and accurately troubleshoot a variety of automotive and household electrical problems. It's auto-ranging scales eliminate the need to dial in the correct range when making electronic measurements. The 10 MegOhm input is safe for automotive and household uses (i.e., household outlets, fuses, wiring, general-purpose batteries, vehicle battery and charging system, automotive circuits and more). The color-coded LEDs allow you to quickly check household batteries (green = good, yellow = weak and red = replace). Includes attachable test leads, holders and stand for hands free use and features protective rubber corner guards for drop protection. The INNOVA 3320 has a single setting resistance function for AC and DC voltage.

    • Color: standart
    • Brand: Innova
    • ASIN: B000EVYGZA
    • UPC: 001910645411

  • bayite AC 80-260V 100A BYT-VAEM-034 Digital Current Voltage Power Energy Analyzer Meter Ammeter Voltmeter with Open-Close Current Transformer Split Core CT

    This meter is used for single-phase power with one hot line and one neutral line. If you want to measure the circuit with 2 hot lines, you will need 2 meters, one for each line. Main Specifications: Working voltage: 80 ~ 260VAC Working frequency: 50/60Hz Measuring:Accuracy: 1% Power Consumption: 0.2W Measurement speed: 2 times/s Operating Temperature Range: 14℉~140℉/-10℃~60℃ Store data when power off The blue backlight can be turned on/off manually Test Range and Display format: 1.Power: test range: 0~22kW < 1kW, display: 0.0~999.9W 1kW~10kW, display: 1000~9999W > 10kW, display: 10~22kW 2.Energy: test range: 0~9999kWh 10kWh, display: 10~9999kWh 3.Voltage: test range: 80~260V(single-phase) Display: 80~260V 4.Current: test range: 0~100A Display: 0.00~99.99A Precautions 1. Please make sure the AC input is Pure Sine Wave.(Municipal electric power is pure sine wave). Please don't use the meter to measure AC power converterd from a DC-AC inverter UNLESS you can make sure the output from your DC-AC inverter is Pure Sine Wave. This is very importatnt. 2. Applied load should not exceed the rated power. 3. Wiring order can not be wrong. 4. This module is suitable for indoor, please do not use outdoor. Packing including: 1x 80 ~ 260VAC 100A Power Mult...

    • Brand: bayite
    • ASIN: B01D8G9GPW

  • Furman PL-PLUS DMC Power Conditioner with Voltmeter / AMMeter

    9 Outlets total outlets with Dual Retractable LED Lights and Voltmeter/Ammeter

    • Color: Black
    • Brand: Furman
    • ASIN: B001JJ8WQK
    • UPC: 654061027980

  • AiLi Battery Monitor Voltmeter Ammeter Voltage Current Meter 8-80V 0-100A Auto Car Motor Boat Caravan RV Motorhome

    This Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours. Read your battery bank like a fuel gauge. Battery Status At A Glance. Combines many functions in one, these information leads to more efficient use of the battery, which can enhance battery life and reduce the risk of failure. State of Charge (%),The remaining battery capacity (AH). Charge and discharge current (A), Voltage (V). Charging status indicator, looks like a smartphone. It is suitable for mobile and portable equipments, e-bike, balance cars, cleaning machines, instruments, ups and so on. This item is suitable for lithium batteries, lithium iron phosphate batteries, lead-acid batteries and nickel-metal hydride batteries which working voltage is from 8V to 80V. Have memory function. Doesn't require isolated power, self-powered 8-80V. It is very easy to install. Specifications Working voltag: 8.0-80.0 V Current range: -100~+100 amps Capacity range: 0-999 ampere-hour Working consumption: 10.0-12.0 mA Standby consumption: 0.5-0.6 mA Sleep consumption: 50-60 uA Voltage accuracy: ± 1.0 % Current accuracy: ± 1.0 % Capacity accuracy: ± 1.0 % Preset capacity value: 0.1-999 Ah Temperature range: 0-35℃ Weight: 270g Size: ø59mm*20 mm Mounting hole: di...

    • Brand: AiLi
    • ASIN: B07CTKYFTG
    • UPC: 732140358399

  • AC Current Voltage Amperage Power Energy Panel Meter LCD Digital Display Ammeter Voltmeter Multimeter with Split Core Current Transformer CT AC 80-260V 100A (AC 100A Meter(Split Core Transformer))

    A.Main Function 1. Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor) 2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm). 3. Power alarm threshold preset function (can set power alarm threshold). 4. The energy can be reset use the key. 5. Store data when power off. 6. Large-screen LCD 7. Backlight function. B. Appearance and Key function Display interface is large-screen LCD, it can display six parameters at the same time. 1. Power: test range: 0~22000W, Starting measure power: 0.5W 2. Energy: test range: 0~999kWh 3. Voltage: test range: 80~260V 4. Current: test range: 0~100A,Starting measure current: 0.02A 5. Frequency: test range: 45~65Hz 6. Power factor: test range: 0~1PF C.Specification parameters 1. Working voltage: 80 ~ 260VAC 2. Test voltage: 80 ~ 260VAC 3. Rated power: 100A/22000W 4. Operating frequency: 45-65Hz 5. Measurement accuracy: 1.0 grade  

    • Color: Black
    • Brand: MORNING GROUP
    • ASIN: B07JB9B2QL
    • UPC: 703931915688

  • Yeeco Digital DC Voltmeter Ammeter Multimeter, 10-90V 0-200A LCD Color Display Voltage Ampere Power Watt Coulomb Capacity Time Meter Tester Testing Detector with Hall Sensor

    Parameter: Current Measurement Range: 0-200A Voltage Measurement Range: 10-90V Display Resolution: 0.1A Current Precision: ± 3% ± 5 digits Voltage Precision: ±2%±5digits Measurement rate: 5time/second Size: 79x43x52(mm) Open Hole: 76.5x39.2(mm) Protection Type & Setting: OVP (over-voltage protection): 0.01V-90V OPP (over-power protection): 0.01W-9.99KW LOP (low-voltage protection): 0.01V-90V OCP (over-current protection): 0.1-100A OAH (over-charge protection): 0.01AH-9999AH OFT (over-time protection): 1min-99hour59min Package include: 1xMultimeter 1xHall sensor

    • Brand: Yeeco
    • ASIN: B073W6Z8TH