• Whirlwind Split 6

    Use this handy box when you need to split a line level signal up to 6 times*. Features 1 female XLR input wired to 6 male XLR outputs. Perfect when adding extra amplifiers to a system, connecting multiple powered speakers, splitting intercom lines, etc. Line level outputs can usually be split 6 times without noticeable loss of signal quality. The actual number of splits that can be accomplished depends on the level of the source signal and the impedances of the source and destinations in a particular application. It is not recommended that the SPLIT 6 be used to split a microphone level signal to more than two outputs. Attempting to do so may result in poor frequency response and reduced signal level. The SPLIT 6 may be used to split microphone level signals in most applications if this limit is observed.

    • Color: blue
    • Brand: Whirlwind
    • ASIN: B0006TIM96
    • UPC: 692465009393

  • ART SPLITComPro Microphone Splitter/Combiner

    The ART Splitcom Pro can split a single microphone signal into two outputs or combine two microphone signals into one output. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The main mic output passes phantom power from the main mixer to the main mic input for use with condenser microphones. Phantom power is blocked from passing to the isolated mic output.

    • Brand: ART
    • ASIN: B001HTRKHO
    • UPC: 840402018308

  • ART P16 XLR Balanced Patchbay

    Reversible 16-point Patchbay with XLR Female and XLR Male Connectors

    • Color: Black
    • Brand: ART
    • ASIN: B004J9WSD0
    • UPC: 840402019152

  • Behringer Ultra-DI DI20 Professional Active 2-Channel DI-Box/Splitter

    BEHRINGER ULTRA-DI DI20 Professional Active 2-Channel DI-Box/Splitter Professional and multi-purpose direct injection box for stage and studio applications Provides impedance and signal matching for the direct connection of instruments to mixers and amplifiers Converts 2 independent unbalanced 1/4'' TRS line inputs into 2 balanced XLR outputs Additional Split mode (channel 1 assigns signal to both XLR outputs) Ultra-flat frequency response due to servo-balanced operation Internal battery automatically shuts off when phantom power is applied Allows direct connection to speaker outputs with up to 3,000 Watts Ground Lift switch eliminates typical ground loop problems Input 2 usable as channel 1 Link output (additional to XLR output) ΒΌ" TRS and gold-plated XLR connectors Ultra-rugged, road-suitable metal case High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany The ULTRA-DI DI20 is a one-of-a-kind DI (direct injection) box that can convert up to two separate unbalanced 1/4" TRS lines into two balanced XLR outputs, or function as a signal splitter. Electric guitarists, keyboardists and bassists will love the flexibility this incredible box provides. Mono, Stereo or Double the Amps By flipping a switch, you can u...

    • Color: Silver
    • Brand: Behringer
    • ASIN: B000CCSWQA
    • UPC: 689076113915

  • Nobsound Little Bear 3(1)-IN-1(3)-OUT XLR Balance Stereo Audio Switcher Passive Selector Splitter Box

    Parameters: Dimensions: L155 * W60 * H50 mm Weight: 160g Packing List: 1 * XLR Audio Selector (audio cable not included)

    • Brand: Douk Audio
    • ASIN: B07875KC4F

  • Galaxy Audio JIBC XLR Combiner

    Add an additional microphone to the POWERED HOT SPOT (or other powered monitor) when all inputs are in use Permits phantom power to go to both microphones if available from the console

    • Brand: Galaxy
    • ASIN: B00079OUNM
    • UPC: 691281600005

  • Hosa YXM-121 XLR3F to Dual XLR3M Y Cable, 6 Inch

    The Hosa YXM121 cable is designed to connect an XLR output to two XLR inputs. It is ideal for assigning the signal from a microphone to two channels on a mixing console.

    • Color: Black
    • Brand: Hosa
    • ASIN: B000068O59
    • UPC: 728736015210

  • Galaxy Audio JIBY 2 Way XLR Splitter

    Add an additional microphone to the POWERED HOT SPOT (or other powered monitor) when all inputs are in use Permits phantom power to go to both microphones if available from the console

    • Brand: Galaxy
    • ASIN: B00079P7T8
    • UPC: 691281600036

  • Tisino XLR Splitter Cable, 3 Pin XLR Female to Dual XLR Male Patch Y Cable Balanced Microphone Splitter Cord Audio Adaptor- 1.5 Feet

    This XLR Female to Dual XLR Male Y Splitter Cable is designed to connect an XLR output to two XLR inputs. Compatible with any XLR connection-microphones, A/V electronic equipment,mixers, home theater devices, camcorders, speakers, etc. Specification: 1- Durable PVC jacket helps to protect the cable against wear and tear. 2- Oxygen-Free Copper (OFC) conductors for enhanced signal clarity, Shielded cable reduces interference and excess noise. 3- Fully screened cable (shielded) - This prevents interference and reduces noise and crosstalk from other sources that may be situated around the cable. The signal produced is a lot cleaner with fewer defects. By using this cable a purer filtered signal path will be achieved. 4- XLR connectors with internal strain relief for rugged reliability. 5- Extra durable and flexible long life construction. 6- True balanced Lo-Z shielded cable and high quality noise free performance. 7- Nickel-plated connectors provide reliable contact. 8- Free velcro cable wrap included. Note: we advice for anyone using a splitter like this for use with un-powered microphones is to only activate the phantom power on one of the channels, not both. phantom power on both inputs that it might cancel each other out or possibly damage the microphone or recording device.

    • Color: Black
    • Brand: TISINO
    • ASIN: B07DHHF2BD

  • ART S8 Eight Channel Mic Splitter

    The ART S8 Microphone Splitter can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs). Each channel of the S8 provides one direct output and one transformer-isolated output from a single microphone. Applications include sending the direct outputs to the main or Front-of-House mixer, and the second isolated outputs to a monitor or recording mixer. The direct outputs pass phantom power from the main mixer to the microphones for use with condenser microphones. The S8 includes a ground-lift switch on each isolated output to reduce hum due to ground loops between connected AC-powered units. For versatility the S8 also features an attenuator pad switch on each input that can be used to connect preamplified signals to the two microphone-level outputs on each channel. Typical preamplified signals would originate from instrument preamplifiers, mixers, keyboards, etc. ART Audio Utilities Series Audio Utilities by Applied Research and Technology are audio devices that have been designed and engineered to exceed high standards for audio performance and functionality. These innovative, high-quality components are perfect for virtually any audio application where precision frequency tailoring, reliable performance and rugged design are of the utmost imp...

    • Color: MultiColored
    • Brand: ART
    • ASIN: B0012NS7HM
    • UPC: 840402018285